Facebook

Table-01

H1 H2 H3 H4
data data data data
MODEL MCS-1
DOT SIGHT EYE RELIEF UNLIMITED, NO CENTERING REQUIRED
RED DOT MOA 3 MOA
OBJECTIVE LENS 17 mm x 23 mm (RECTANGLE)
RETICLE TYPE ON DOT SIGHT DOT ILLUMINATED
1 CLICK 24 MM @ 100 M (DOT ONLY) / 1 MOA
ELEVATION ADJUSTMENT RANGE 150 CLICKS TRAVEL
BATTERY CR2032 @ 1 pc
DIMENSIONS (W/O Lever) 48mm x 34mm x40mm (H) (L x W x H)
TEMP RANGE -40° – +43° C, (-40°- +109° F)
WATER PROOF 10 FT or Below
SYSTEM Parallax Free, Reflex, Collimater System
MOTION SENSOR BUILT-IN / 30 MINUTES FACTORY SET
FOV 27 Degrees / 23.3 M @ 100 M
OPTICAL COATING MULTI LAYERS, ANTI-REFLEX
LOW/HIGH PROFILE LOW
LED RETICLE BRIGHTNESS 3 LEVELS AUTO BRIGHTNESS
WINDAGE ADJUSTMENT RANGE 150 CLICKS TRAVEL
BATTERY LIFE 500 HRS ( at Mid Brightness)
WEIGHT 119 g (4.2 Oz)
ENVIRONMENT TEST MIL-STD 810 Qualified / Water Proof
NIGHT VISION COMPATIBILITY NO

 

Blog Story

MGS Group

Pride of D.I. Optical Co., Ltd. / Dot Sight for Machine Guns
With our success in developing a large diameter dot sight which has been proven to perform and last, we are pushing the development of optical technology to the next level. DI Optical’s dot sight for machine guns now provides a wider field of view to enable shooters to take aim rapidly with both eyes open and observe moving targets with outstanding efficiency in vehicles, helicopters or ships. Users can adjust the brightness of the reticle in reference to surrounding conditions and take aim with confidence in any illumination.
(Previous world’s maximum diameter 44 mm ==> DID’s maximum diameter (120 x 70 mm)